Chimneys

Single layer

The single-layer chimneys are made of stainless acid-resistant AISI 316L steel with a thickness of 0.6 mm, so they are suitable for burning all types of fuels (solid fuels, fuel oil, gas). They range in diameter from 80 to 400mm with the option of additional elements and joints for coupling to flexible pipes and elements. They have a flared socket, which allows them to be joined with gaskets or couplings. Low mass allows rapid heating to reach operating temperature.

The flue elements are tested according to UNI EN 1856-2 at 500°C for the following fuels: natural gas, methane, fuel oil, petroleum, plaeti and wood.

Multilayer

The three-layer chimneys with 25 mm of insulation on each wall are made of stainless acid-resistant AISI 316L steel with a thickness of 0.6 mm and are therefore suitable for burning all types of fuels (solid fuels, fuel oil, gas). They range in diameter from 80 to 400 mm, with the possibility of additional elements and joints for joining with single-layer elements and flexible pipes. And the practical clamps make it easy to join the elements together. Low mass allows rapid heating to reach operating temperature.

The flue elements are tested according to UNI EN 1856-2 at 500°C for the following fuels: natural gas, methane, fuel oil, petroleum, plaeti and wood.

Flexible flue pipes

The inner walls of the tubes are smooth, allowing maximum efficiency of the airflow from the fans and the condensate drainage. The hose shall maintain the same smoothness at the bends. With their double structure and low weight, they are suitable for installation in old domestic and industrial flue systems. The pipes are made of INOX AISI 316L and range in diameter from 80mm to 300mm with the possibility of additional elements and joints for joining with conventional pipes and elements.